Bird and Bug Screens

Bird and bug screens protect vent, duct, and exhaust line terminations from bird nesting, insect intrusion, and wind-blown debris. They keep vent lines open, protecting storage tanks, pressure vessels, drains, and stacks from vacuum collapse or overpressure.

Key Features

  • Five standard configurations for open-end, in-line, angled, and flanged openings.
  • Galvanized steel and stainless steel in standard and optional gauges
  • 3/8″ or 1/2″ square wire mesh standard, with expanded metal or perforated plate options for increased airflow or durability
  • Flat plate ring or angle flange reinforcement on screens over 24″ in diameter
  • Optional neoprene, silicone, or rubber seals for vibration isolation
  • Quick installation and minimal upkeep

Types

  • Angled Type Bird Screen
  • Single Clamp Bird Screen
  • Double Clamp Bird Screen
  • Worm Gear Clamp Type Bird Screen
  • Flanged Bird Screen

 

Installation

Sweco Fab bird screens are engineered for quick installation and long-term performance on duct, vent, and pipe terminations.

  • Position the screen over the opening.
  • Secure it using the appropriate clamp, flange bolts, or fasteners.
  • Check that the mesh sits evenly and the seal, if provided, is properly compressed.

After installation, screens require minimal upkeep. Inspect regularly for debris, corrosion, or loosened hardware. Clean with air or water to maintain unrestricted airflow, and replace damaged mesh, seals, or coatings as needed to keep the vent line protect

Related Products

Request A Quote

Rfq datasheet pig launcher receiver Please refer to the RFQ datasheet PDF.


In industrial, petrochemical, and processing environments, unprotected vent lines are subject to bird nesting, insect intrusion, and wind-blown debris. A blocked vent line can cause the equipment failure it is installed to prevent.

Sweco Fab bird screens provide reliable protection against debris, nesting and foreign material intrusion in duct, vent, and exhaust line terminations. They are available in five standard configurations, in galvanized steel and stainless steel, for diameters from 1″ to 72″, with reinforced construction for larger screens.

Each configuration suits a different mounting condition and maintenance need.

Configuration Construction Best Suited For
Angled Type Bird Screen 45° or custom angle cut screen assembly, secured with a threaded fastener through the mesh face Angled duct or pipe terminations; confirm airflow orientation before final tightening
Single Clamp Bird Screen Dome-style mesh cap secured with a single bolted clamp bracket Round duct and pipe ends needing a straightforward fit
Double Clamp Bird Screen In-line screen assembly secured on both sides with clamp bands Screens that sit within a straight run rather than at an open end
Worm Gear Clamp Type Bird Screen Dome mesh cap secured with an adjustable worm gear (hose-clamp style) band A wide range of duct diameters; easy re-tightening during maintenance
Flanged Bird Screen Bolt-pattern flanged screen with RFSW flange Terminations that mate directly to a matching pipe or vent flange, for a fully bolted, code-friendly connection

Sweco Fab bird screens are available in galvanized steel and stainless steel, in standard and optional gauge thicknesses covering a wide range of diameters.

Material Gauge Class Gauge Min. Diameter (in.) Max. Diameter (in.)
Galvanized Standard 11 1 24
Galvanized Standard 10 or Thk. 24 72
Galvanized Optional 18 1 24
Galvanized Optional 16, 14 1 24
Stainless Steel Standard 11 1 24
Stainless Steel Standard 9,10 8 72
Stainless Steel Optional 18, 16 1 8

Note: Screens over 24″ in diameter are reinforced with flat plate rings or angle flanges for structural integrity.

Q: What is a bird screen on a vent line?
A: A bird screen is a mesh assembly fitted to a duct, vent or exhaust line termination. It keeps out birds, insects, and wind-blown debris while the vent continues to equalize pressure and release vapors.

Q: Why do vent lines need bird and bug screens?
A: Nesting, insects, or debris can block it, and a blocked vent can expose storage tanks and pressure vessels to vacuum collapse or overpressure.

Q: What types of bird screens does Sweco Fab offer?
A: Sweco Fab offers five standard configurations: Angled Type, Single Clamp, Double Clamp, Worm Gear Clamp, and Flanged. Each suits a different mounting condition and maintenance need.

Q: What materials and sizes are available?
A: Screens are available in galvanized steel and stainless steel, in standard and optional gauges, for diameters from 1″ to 72″. Screens over 24″ are reinforced with flat plate rings or angle flanges.

Q: How is the mesh size selected?
A: Mesh that is too fine restricts airflow and blinds over with debris. Mesh that is too coarse lets insects and smaller birds through. The correct size requires engineering evaluation of the service conditions.

Q: How are bird screens maintained?
A: Inspect regularly for debris, corrosion, or loosened hardware. Clean with air or water, and replace damaged mesh, seals, or coatings to keep airflow unrestricted.

Q: Can Sweco Fab build custom bird screens?
A: Yes. Sweco Fab engineers design screens around the vent diameter, mesh requirement, mounting configuration, and material specification, or replicate an existing design at an improved price point. Schedule time with an engineer to discuss your vent lines.

Top